SPORTSTECH F15 Mode D'emploi page 35

5
70
20
Step 2:
A.Remove the four Head Hex Socket Screws (17) in the end of the Left Stand Tube and Right Stand
Tube. B.Attach the Handlebar (70) onto both ends of the Stand Tube, tighten the screws with the
Allen Key provided.
C. Connect the wire that comes from the Computer Console (5) to the Main Control Cable Socket
from the right handlebar support of the Right Stand Tube .
D.Install both Handlebar Covers (19) onto the Handlebar (70).
9
Step 3:
A.Turn the Computer Console (5) up or down to align the Socket Head Screw hole.
B. Lock the Computer Console (5) in place by tightening the Socket Head Screw (9).
17
19
84
54
36
Haupt-Steuerkabel Steckverbindung
Main Control Cable Socket
5