Temperature Setting - Indel B TB 20 BT DT Instructions D'utilisation

CONTROL PANEL USE
FAST SPEED COOLING
LEFT BOX FAST SPEED COOLING
SETTINGS
When the fridge is off, press the button "ON/OFF" for 3 seconds, the fridge will start to work; When
the fridge is working, press the button "ON/OFF" for 3 seconds, the fridge will be off.

TEMPERATURE SETTING:

• Left-bin temperature setting: when the fridge is switched on, press the left-bin button "∧" or "∨":
the temperature value will increase or decrease accordingly. Keep pressed the left-bin button
"∧" or "∨": the temperature will increase or decrease at 4°C/second (the default temperature for
left-bin is -18°C)
• Right-bin temperature setting: when the fridge is switched on, press the right-bin button "∧" or
"∨": the temperature will increase or decrease accordingly. Keep pressed the right-bin button
"∧" or "∨", the temperature will increase or decrease at 4°C/second (the default temperature for
right-bin is 5°C).
FAST SPEED COOLING MODE:
• When the fridge is working, shortly press the left-bin fast speed cooling button, the left-bin
will enter the fast-speed cooling mode, the left-bin character "fast speed cooling" will be blue
lighted. In this mode, the left-bin will cooling for 15mins while the right-bin doesn't work during
this period (the temperature could be set) and then back to the normal cooling mode (both the
two bins work respectively).
• When the fridge is working, shortly press the left-bin fast speed cooling button, the left-bin will
enter the fast-speed cooling mode, shortly press the left-bin fast speed cooling button again, it
will recover to the normal two bins cooling mode.
• After remove the partition which is inside of the cabinet, the fridge will be single cabinet. The
left-bin fast speed cooling button doesn't function and there is no blue light.
LEFT BIN
RIGHT BIN
ON/OFF
UNLOCK
ON/OFF
15