Dispensing Hot Water; Personalized Drinks - Thermador TCM24PS Mode D'emploi

Dispensing hot water

¡
CAUTION
Risk of burns!
The beverage outlet gets very hot. After
use, always let it cool down before you
touch it�
The appliance must be ready for use.
● Remove the milk tube from the milk
container�
● Remove any milk or coffee residue from
the outlet�
● Place a cup or glass underneath the
beverage outlet.
● Select "Hot water" with the K or L
arrow button.
Note:
The settings can be changed as described
in the section "Drink adjustment".
● Press C to start
dispensing�
● The message appears "Milk tube removed
from milk container?"�
● If still connected, remove the milk tube
and press the M arrow button.
Hot water flows out of the beverage outlet.
Press C again to prematurely
halt the dispensing process�

Personalized drinks

Press B to open the selection
for personalized drinks�
Up to 8 storage spaces can be used. Save
your favourite drinks that are frequently
dispensed here with all their settings�
Note:
Press B to exit the menu
without saving at any time�
Entering or changing drinks
● Press B�
Dispensing hot water
The selection of memory locations appears�
Favorites 1
Create
● Use the K or L arrow button to
select an empty memory location [ for a
new entry, change an occupied memory
location, or to delete a favourite drink�
● Select "Create" at an empty memory
location or "Change" at an occupied
memory location�
● Press the M arrow button.
Note:
If "Delete" is selected, the settings for the
memory location are deleted and it is again
empty�
The menu for adjusting the drinks opens�
The last drink dispensed is shown with the
last settings selected�
● If you do not wish to save last drink
dispensed, select another drink with the
K or L arrow button.
● Select each setting to be changed with
the M or N arrow button.
Adjust the values to your own wishes with
the K or L arrow button.
Different setting options appear depending
on the drink selected�
Note:
For milk drinks, the mixing ratio of coffee
and milk can be set.
● The settings can be stored under an
individual name� Select "Save name"�
The display for entering the name opens�
S T U V W X Y Z A B C D E F G H I J
A
Choose character
Delete
en
15