Maintenance & Adjustment - Cub Cadet FastAttach 19A30035100 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance & Adjustments
Maintenance
General Maintenance
1.
After each use, run clean water through
the sprayer.
2.
Thoroughly drain and clean the sprayer
tank.
3.
Never store chemicals in the tank.
4.
When mixed, chemicals may cause an
undesireable effect or cause noxious
fumes.
5.
Disconnect the wiring harness from the
battery when not in use.
6.
Check sprayer tie down straps and
hardware.
Winterizing and Long-term Storage
The following steps should be followed for the
maintenance and storage of your sprayer.
1.
Wash and flush out sprayer after
completion of each phase of your
program. Flush out sprayer when
changing chemicals if there is a
possibility of the chemicals being
incompatible. Use of a detergent is
advisable if the chemical manufacturer
does not make specific cleaning
recommendations. Flush system
completely, including nozzles. Never use
metal objects to open clogged nozzles.
2.
Clean sprayer thoroughly before storing
at the end of the spraying season.
Permanent type anti-freeze added to the
final rinse will leave a rust inhibiting film
in parts of the sprayer.
5
11

Publicité

Chapitres

Table des Matières
loading

Table des Matières