Technical Specifications; Noise And Vibration Information - SPARKY HD Professional FK 6522 Notice Originale

Technical specifications

Model
Power input
Power output
Rated speed
Soft start
Spindle thread
Spindle tread length
Wheel arbour
Wheel diameter, max.
Groove depth
Groove width
Weight (EPTA Procedure 01/2003)
Protection class (EN 60745-1)

NOISE AND VIBRATION INfORMATION

Measured values determined according to EN 60745.
Noise emission
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Cutting grooves in concrete
Vibration emission value a
Uncertainty К
* The vibration emission values are determined according to 6.2 EN 60745.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce
the harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory dis-
eases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ To achieve a high level of dust collection, use vacuum cleaner for wood or for wood and/or minerals
together with this tool.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
Original instructions
pA
wA
h
FK 6522 FK 6524
2200 W 2400 W
1400 W 1700 W
6600 min 6500 min
-1
yes yes
M14 M14
20 mm 20 mm
22,23 mm 22,23 mm
230 mm 230 mm
20÷65 mm 20÷65 mm
9÷40 mm 9÷40 mm
9.6 kg 10.4 kg
II II
107 dB(A) 107 dB(A)
3 dB 3 dB
118 dB(A) 118 dB(A)
3 dB 3 dB
8 m/s 8 m/s
2 2
1.5 m/s 1.5 m/s
2
FK6526
2600 W
1900 W
6500 min
-1 -1
yes
M14
20 mm
22,23 mm
230 mm
20÷65 mm
9÷40 mm
10.4 kg
II
107 dB(A)
3 dB
118 dB(A)
3 dB
8 m/s
2
1.5 m/s
2 2
3
EN