Cafe CFE Manuel D'utilisation Et D'installation page 32

Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
6
LEVEL THE FREEZER DOOR
(cont.)
C
Lift the door on the side requiring adjustment,
rotate the cam to required position.
0 - Initial position
After adjustment tighten the 3 attachment
D
screws using to 65 in-lb (7.34 N-m).
7 INSTALL THE FRESH FOOD
DOOR HANDLES
Handle Design varies based on models, however
Installation is same.
Stainless steel and plastic handles:
Place the handle on the mounting fasteners,
wrench.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4 Allen
wrench.
Mounting
Fasteners
49-1000586 Rev. 1
INSTALL THE FREEZER DOOR
8
HANDLE
Handle Design varies based on models, however
Installation is same.
Stainless steel and plastic handles:
Place the handle on the mounting fasteners,
wrench.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4 Allen
wrench.
Mounting
Fasteners
Remove the handles using the same procedures as
installing.
31