Environmental Protection; Intended Use - Ryobi RBC1020 Traduction Des Instructions Originales

without guards in place.
■
Never fit a metal replacement line.
■
Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
■
Never pick up or carry the trimmer by the electric cable.
■
Beware of objects thrown by the cutting line.
■
Exercise extreme caution when using the blade with
this unit. Blade thrust is the reaction that may occur
when the spinning blade contacts anything it cannot
cut. This contact may cause the blade to stop for
an instant, and suddenly "thrust" the unit away from
the object that was hit. This reaction can be violent
enough to cause the operator to lose control of the unit.
Blade thrust can occur without warning if the blade
snags, stalls, or binds. This is more likely to occur
in areas where it is difficult to see the material being
cut. For cutting ease and safety, approach the weeds
being cut from the right to the left. In the event an
unexpected object or woody stock is encountered,
this could minimize the blade thrust reaction.
■
Switch off and disconnect from the power supply before:
●
servicing
●
leaving the trimmer unattended
●
cleaning your trimmer
●
changing accessories
●
checking for any damage after hitting an object
●
checking for any damage if the trimmer starts to
vibrate abnormally
●
performing maintenance
MAINTENANCE
■
Use only manufacturers recommended replacement
parts and accessories.
■
After extending new cutter line, always return the
machine to its normal operating position before
switching on.
■
After each use, clean with a soft dry cloth.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorized service
centre.
■
When not in use, tools should be stored in a cool dry
place and locked up out of the reach of children. Do not
store outdoors.

INTENDED USE

Brush cutter
■
The product is fitted with a rotating blade made of metal
or plastic intended to cut weed, brush, small trees and
similar vegetation.
■
This brush cutter is not allowed to be used for cutting
or chopping:
2
●
flowers
●
in terms of composting. Otherwise, there is a risk
of injury.
Trimmer
■
The trimmer is designed for cutting grass and light
weeds only in private garden areas.
■
The device is not allowed to be used in public gardens,
parks, sports centers or at roadsides as well as in
agriculture and forestry.
■
This lawn trimmer is not allowed to be used for cutting
or chopping:
●
hedges, shrubs and bushes
●
flowers
●
in terms of composting. Otherwise, there is a risk
of injury.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SYMBOL
Safety alert
V Volts
Please read the instructions carefully
before starting the machine.
Wear eye and ear protection.
Wear non-slip safety footwear when
using this equipment.
Wear non-slip, heavy duty gloves.
Avoid using in wet or damp conditions.
This unit is not intended for use with a
toothed saw type blade.
English