Rowenta REDKEN STEAM PRO Mode D'emploi page 7

4. SWITCHING ON YOUR STRAIGHTENER
USING IT FOR THE 1 st TIME
1) Plug in the straightener.
To switch your straightener on: press continuously on the on/off button.
The LCD screen will then come on automatically.
2) Select the ideal temperature for the type of hair you want to straighten using the + and – buttons:
Press the – button to reduce the temperature or the + button to increase it.
• It takes 90 seconds for the straightener to heat up.
While it is heating up the temperature indicator of the straightener will flash.
• There are 5 temperature settings for you to choose from: 330-350-370-390-410° F (170-180-190-200-210°C).
• We advise you to observe the following recommendations:
Type of hair Normal
Fine hair 390°F – 200 °C / 1 to 2 runs
Normal hair 410°F - 210°C / 1 to 2 runs
Thick hair 410°F - 210°C / 1 to 2 runs
• When the temperature shown on the indicator stabilises and remains constant, this means that the temperature that
you have chosen has been reached.
• After 5 seconds, the straightener will go into LOCK AUTO mode (a padlock symbol appears on the dial). This mode stops
any ill effects occurring if you inadvertently press on a button you shouldn't have during use (for example pushing by
mistake on the + /- buttons during use).
• If you wish to change the temperature of your straightener, you will have to unlock it:
To do this, press again for a few seconds on either the + button or the -button. The control is now unlocked and the pad-
lock sign will disappear from the screen.
At any time you can exit the control by pressing continuously on the – or + buttons.
When you use your straightener for the very first time, keep the tong closed in your hand until the steam appears
(it will take around 90 seconds for you to obtain steam the first time you use your straightener).
3) Start the straightening by running the straightener once or twice along the hair section, depending on the type of
hair (cf table below).
You must move the straightener slowly so that the steam can be spread correctly at the heart of the hair section.
5. HOW TO PROCEDE
The straightener has a mobile plate to make the straightening action more effective.
1) Direction of use.
• The straightener must be used in the direction indicated by the arrows (comb always located at the bottom) so that the
hair section is exposed to the steam before being straightened between the plates.
Fragile
370°F – 190° C/ 1 to 2 runs
390°F – 200 °C/ 1 to 2 runs
390°F – 200 °C/ 2 runs
7
Very fragile
350°F – 180 °C / 1 to 2 runs
370°F – 190° C / 1 to 2 runs
390°F – 200 °C / 2 runs
EN