Rowenta REDKEN STEAM PRO Mode D'emploi page 5

SAVE THESE
INSTRUCTIONS
2. GENERAL DESCRIPTION
A. On/off button
B. +/- buttons for reducing /
increasing the temperature
C. Digital screen
D. Straightening plates
E. Mobile plate
F. Detachable comb
3. BEFORE STARTING TO USE YOUR STRAIGHTENER
This iron has a polarized plug (one blade is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
OPERATION
IMPORTANT: This straightener must be used with its resin cartridge.
If you do not use the cartridge, the product's guarantee will no longer be valid.
Do not use the straightener on artificial hair (wigs, extensions ...)
We recommend you use your straightener with its comb (F) so that the hair section is spread over
the plate and as a result you obtain a perfect straightening from the roots to the ends.
PREPARATION
1) resin cartridge:
This straightener must be used with its resin cartridge. The straightener is fitted with a demineralisation cartridge
which serves to filter out the fur. This cartridge contains a resin which changes color as it progressively becomes
worn out.
When it is new, it is green in color. When it is worn out, it turns blue: when this happens it needs to be changed.
2 cartridges are delivered with the straightener. We advise you to always keep a spare cartridge at hand.
If the cartridge has a life of several months depending on the frequency of use and the water hardness.
You need to change your cartridge when it changes color: to do this, refer to the window control (0) of the Steam
TM
Infusion tank.
We advise you to keep your straightener's resin cartridge immersed so as to optimise its life span.
Should the resin dry out, it will go a yellow color. In this case all you need to do is immerse it again for it to return to
its original color.
The resin is made from polystyrene and can be thrown out with other household waste when the cartridge is
worn out.
If you need to get a new resin cartridge please contact your Redken representative or retailer,
or alternatively visit our accessories website: www.accessories.home-and-cook.com
How to fit the cartridge:
1 Take the cartridge out of its sachet.
2 Remove the red protective seal (fig. a) on the top of the cartridge.
3 Remove the lid from the reservoir by unclipping it completely (fig. b).
4 Slide the cartridge into place (fig. c).
5 Replace the lid of the reservoir by clipping it back on (fig. d). You will hear a click sound.
G. Steam outlet
H. Steam cord
I. Base
J. Detachable water reservoir
K. Reservoir lid
L. Filling cap
M. Minimum filling level
5
N. Maximum filling level
O. Control window
P. Power cord
Q. Resin cartridge
R. Protective seal
S. Top grill
T. Storage stand
EN