Clarity XLC 3.4 Guide De L'utilisateur page 28

MENU - RINGER SETUP
XLC3.4
• In order to adjust the ringer volume, the RINGER
ON / OFF switch on the side of the XLC3.4 must
be set to the ON position. Use UP or DOWN
to reach the desired level of ring loudness. When
finished, press MENU to save your setting.
Screen will display "OK" and you will hear five
beeps.
If the RINGER ON / OFF switch is set to OFF, the
screen displays "Ringer Off" (middle of screen)
with no sound made. Turn ringer volume switch
ON or return phone to standby.
• To adjust the ringer tone, press DOWN to
advance the row that reads "Ringer Tone" to the
top of the screen. Press MENU to select this
option.
Use UP or DOWN to scroll through the
available ring tones.
Press MENU to save the setting you selected.
Screen will display "OK" and you will hear five
beeps.
• To turn the keypad tones on or off, press DOWN
twice to advance the row that reads "Keypad
Tone" to the top of the screen.
Press MENU to select this option.
Use UP or DOWN to make your selection -
indicated by the cursor on the left of the screen.
Press MENU to save your selection. Screen will
display "OK" and you will hear five beeps.
Ringer Vol
Ringer Off
OK
Ring Tone 1
Ring Tone 2
Ring Tone 3
OK
Keypad Tone
-------------
Ringer Vol
Keypad Tone
Off
On
OK
E
N
G
L
I
S
H
25