Electrical Connections - Dimplex XLE Série Mode D'emploi

Electrical Connections

Warning: Before obtaining access to terminals, all supply circuits must
be disconnected.
7. The heater leaves the factory configured to operate with two mains supplies, a 24
hour peak supply and an off peak switched supply. (Fig. 7)
Not suitable for use on single supply.
Storage / Fan circuit
Fan Circuit
Storage Circuit
Fan Circuit
Storage Circuit
The earth wire should be connected into the earth terminal block marked E
WARNING: Terminal block maximum torque 0.5 Nm
Switched Supply
Terminal Block
Neutral
Live
(Peak)
Neutral
Live
(Off-Peak)
Earth
(Both Supplies)
10
= PEAK L
= OFF-PEAK L
= PEAK N
= OFF-PEAK N
Fig. 7 Fig. 8
Tighten Screws
Mains
Cable