Instructions For Returning By Mail; Method Of Maintenance; Components Which User Can Not Replace; Not Replaceable Fuses By User - Promax Premium 10 Mode D'emploi

USER'S MANUAL. PROMAX-10
5 MAINTENANCE
This part of the manual describes the maintenance procedures and the location
of faults.
5.1

Instructions for returning by mail

The method of maintenance to be carried out by the user consists of cleaning
the cover and changing the battery. All other operations should be carried out by
authorised agents or by personnel qualified in the servicing of instruments.
If the instrument does not respond to the controls for any unknown reason,
switch it off by pressing the disconnection key for a few seconds and then turn it on
again.
5.2

Method of maintenance

The method of maintenance to be carried out by the user consists of cleaning
the cover and changing the battery. All other operations should be carried out by
authorised agents or by personnel qualified in the servicing of instruments.
5.2.1 Cleaning the cover.
Do not use scented hydrocarbons or chlorized solvents. Such products may attack the
plastics used in the construction of the cover.
The cover should be cleaned by means of a light solution of detergent and
water applied with a soft cloth. Dry thoroughly before using the system again.
To clean the contacts, use a dry cloth. Do not use a wet or damp cloth.
Do not use for the cleaning of the front panel and particularly the viewfinders, alcohol or
its derivatives, these products can attack the mechanical properties of the materials and
diminish their useful time of life.
5.3

Components which user can not replace

5.3.1 Not replaceable fuses by user

To be replaced by qualified personnel. Its position identifier and characteristics
are:
F003:
F004:
F005
11/2008
Premium
FUS 0.5 A T
FUS 2.5 A T
FUS 7A T
CAUTION
CAUTION
CAUTION
125 V
125 V
125 V
Page 45