Zyxel P-334WHD Guide Rapide page 5

The LEDs
Look at the top panel LEDs. When you
connect the power, the PWR LED blinks and
stays on once the device is ready.
The LAN, WAN and WLAN LEDs turn on if
the corresponding connections are properly
made.
2 Accessing the Web Configurator
1 Launch your web browser. Enter "192.168.1.1" as the web site address.
Note: If the login screen does not display, check your browser's security settings (see
Troubleshooting for details) or make sure your computer is set to receive an IP address
dynamically (see
2 The Password window displays. Enter the
password ("1234" is the default) and click Login.
3 Change the password in the screen that follows
and click Apply.
Set Up Your Computer's IP
ENGLISH
Address).
4 Click Go to Wizard setup to set up your P-334WHD
(in router mode) for the first time.
Click Go to Advanced setup to use main menus to
configure advanced features, such as operating
mode.
5