Zyxel P-334WHD Guide Rapide page 13

PPPoE Connection
A Select PPPoE as your WAN connection type.
B Type a Service Name (optional), User Name and Password.
C Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to D.
Or
Select Use fixed IP address provided by your ISP to give the P-334WHD a static IP address. Go to C1.
C1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask
and the neighboring device's IP address given by your ISP.
If you are given DNS server settings, enter them in the fields. Otherwise leave the default settings and click
Next.
D Select Factory Default to use the factory assigned default MAC address.
E If you want to set up a WAN dial-up connection, enter the login name, password and phone number that are
assigned by your ISP for the dial-up connection. Otherwise, leave the default settings and click Next.
F If you want to set up a WAN dial-up connection, select Get automatically from your ISP if your ISP did not
assign you a fixed IP address. Skip to G.
Or
Select Use fixed IP address provided by your ISP to give the P-334WHD a static IP address. Go to F1.
F1 If you select Use fixed IP address provided by your ISP, enter the WAN IP address given by your ISP.
If you are given DNS server settings, enter them in the fields. Otherwise leave the default settings and click
Next.
G Select the check box to have the P-334WHD apply bandwidth management to traffic going out through the
WAN, LAN or WLAN port according to the traffic type.
H Click Apply to save your changes.
ENGLISH
13