Before Your First Treatment - Tria 4X Instructions D'utilisation

BEFORE YOUR FIRST TREATMENT

CHARGE THE TRIA LASER 4X
Charge the Tria Laser 4X for at least
2 hours before you use it or anytime the
battery indicator is "empty" and blinking.
If you are covering a large area or have the
Tria Laser 4X set to a high energy level,
you may need to charge the Tria Laser 4X
in the middle of a treatment. This is normal.
TO CHARGE:
1.
Plug the battery charger into the Tria Laser
4X charger socket and into a power outlet.
2. The battery indicator will show it is "filling
up" while the Tria Laser 4X is charging.
3. Once fully charged, the battery light will
stay on and you may unplug the charger.
The Tria Laser 4X can remain plugged in for
extended periods of time without damage.
14
NOTE: To prevent damage to your Tria
Laser 4X, use only the included Tria battery
charger. If you lose the charger, please
contact Customer Care.
NOTE: You may charge the laser in
Quiet mode (charges without the sound
of cooling fan), but it will take longer.
To change charging modes, press the
power button while charging.
TEST THE LASER ON A PATCH OF SKIN
Before your first full treatment on a new
area of your body, we recommend you test
the Tria Laser 4X on a patch of skin there
and try different energy levels.
1. Prepare your skin and unlock the Tria Laser 4X
(see pages 16-17). The Tria Laser 4X will be
set to Level 1 (low).
2.
Place the treatment window flat against
your skin, and test one laser pulse.
3. If Level 1 was tolerable for you, then move
to another test area and increase to Level 2,
testing a patch at that level with one laser
pulse. To adjust the Tria Laser 4X setting up
or down, press the power button (see page 17).
4. If Level 2 was tolerable for you, change test
locations and increase by one level until you
find the highest setting that is still tolerable.
Treating at the highest level possible will
maximize results.
5. Wait 24 hours and then examine the test
areas. If the skin appears normal, start your
first treatment at the highest level you are
comfortable using.
Retest your skin if your skin tone changes
dramatically (due to tanning).
If you notice blistering, burns, changes
in your skin tone or any other side effects,
or if you are not sure about the outcome
of the test, DO NOT USE your Tria Laser 4X.
Contact Customer Care or your doctor.
triabeauty.ca 15