Before Every Treatment - Tria 4X Instructions D'utilisation

BEFORE EVERY TREATMENT

PREPARE YOUR SKIN
1. Cleanse the treatment area, removing all
cosmetics, lotions and creams that may
block the laser light.
2. Shave the treatment area. This removes the
surface hair, which improves comfort and
allows the light to better reach the hair in
the follicle.
3.
Dry the treatment area.
UNLOCK THE LASER
The Tria Laser 4X will lock when it's not in
use. To unlock the Tria Laser 4X, use the skin
sensor, which helps confirm that the Tria
laser is safe for your skin tone. To unlock:
1. Unplug the Tria Laser 4X from the battery
charger and press the power button to turn
it on. The display will show the lock and
skin sensor icons.
16
2. Hold the skin sensor (red light at the base
of the Tria Laser 4X) against the skin in the
area you wish to treat. The skin sensor will
automatically sense and check your skin.
If the Tria Laser 4X is safe for your skin
tone, the Tria Laser 4X will emit a series
of beeps and unlock.
1 2 3 4 5
3. If the lock icon is still visible and you do
not hear a series of beeps, then it may
not be safe for you to use the Tria Laser
4X. Or, you may be using the skin sensor
incorrectly and need to try again. To try
again, lift the skin sensor from your skin
and follow Steps 1 and 2 above. If you still
cannot unlock the Tria Laser 4X, please
contact Customer Care for assistance.
SET THE TREATMENT LEVEL
The Tria Laser 4X has different energy
levels. In a clinical study, higher levels were
found to be 2-3 times more effective. So for
best results, we recommend you use the
highest setting that you can tolerate.
When the Tria Laser 4X is on and unlocked,
press the power button to select your
desired level. Each time you press the
power button, the level will increase.
Once the Tria Laser 4X is at the maximum
level, pressing the power button again
will return it to the lowest level.
triabeauty.ca 17