3.6.1 rubber feet installation
Place the appliance face down on a soft surface.
A.
Using a screw driver, remove the screws on the bottom of the appliance.
B.
Install the 4 rubber feet (6 rubber feet for NEFL60FH-MT) onto the bottom of the appliance using the
C.
screws from Step B. See illustrations below.
note:
The screws for installing the rubber feet are secured to the appliance. Removal of the screws is neces-
sary for installing the rubber feet.
NEFL42/50FH-MT ILLUSTRATED
NEFL60FH-MT ILLUSTRATED
installation
EN
15
W415-2172 / D / 10.30.20