Connecting The Power Cord And Turning On The Power; Specifying The Initial Settings; Selecting The Method To Connect The Machine; Direct Connection - Canon LBP253x Mode D'emploi

Connecting the Power Cord and Turning ON
the Power
En
Do not connect the USB cable at this time. Connect it when
installing software.
Principle of Describing the Operating Instructions
This Getting Started Guide describes the operating
instructions using illustrations of the LBP253x's screen.
In following some operating instructions, such
as "select ..., " the operation you perform differs,
depending on the model of the machine.
● LBP253x
Paper Settings
Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
Select Frequently Used Paper Sizes
Tap the item the
operating instruction
refers to.

Specifying the Initial Settings

The first time you turn ON the power, follow the instructions
on the screen. For details on navigating the menu and how to
input the numbers, see "Navigating the Menu and Text Input
Method" on p. 9.
Complete settings starting with language
●
and through to date and time
Follow the instructions on the screen, set the language,
region, time zone, and date and time.
Language
English
Japanese
French
Spanish
German
Italian
10
2
1
● LBP252dw/LBP251dw
Paper Settings
Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
Use [▲] , [▼] , [ ◄ ] , or [ ► ]
to select the item the
operating instruction
refers to, and press
Current Date/Time Settings
10/10/2015 10:26 AM
(0:00-12:59)
Apply
Setting a Remote UI PIN
●
You can set a PIN for access to the Remote UI.Protect the
machine from unauthorized access by only allowing users with
access privileges to use the machine.
To specify settings later, please refer to "Setting a Remote UI PIN"
in the e-Manual.
e-Manual "Setting a Remote UI PIN"
e-Manual "Setting the System Manager ID"
Setting the Remote UI Access
PIN is recommended when
using Remote UI to prevent
unauthorized access by a
third party.
Do you want to configure the
settings?
Settings can be configured
Yes
later.
Selecting the Method to Connect the
Machine
Connecting via a Wired LAN
●
You can connect the machine to a wired router. Use the LAN
cables to connect the machine to the wired router (access point).
Connect the computer to the router by cable or wirelessly.
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 or higher twisted-pair cable ready.
Connecting via a USB cable
●
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
OK .
Connecting via a Wireless LAN
●
You can connect the machine to a wireless router*. Since it
is connected to wireless, no LAN cables are needed.
* A wireless router (access point), which supports IEEE802.11b/g/n,
is required.
Connect the computer to the router by cable or wirelessly.

Direct Connection

●
Connect a mobile device to the machine wirelessly and
directly without routing through a wireless LAN router (or
access point)
e-Manual "Can Be Used Conveniently with a Mobile
Device"
Direct Connection (Access Point Mode)"
No
►
"Connecting to a Mobile Device"
►
"Make