Navigating The Menu; Turning On/Off The Power; Specifying The Initial Settings; Setting Up The Connection - Canon imageRUNNER 2204 Mise En Route

Navigating the Menu

Current Date/Time Settings
01/08 2014 10:00 AM
(0:00-12:59)
Apply
◄►
Back <Apply>
Item selection
Tap an item to select it. Press
screen.
Setting confirmation
Tap the item. However, when <Apply> appears, tap <Apply>.

Turning ON/OFF the Power

OFF
• Make sure that the power plug is firmly inserted into the
power outlet.
• Do not connect the USB cable at this time. Connect it
when installing software.
to return to the previous
ON

Specifying the Initial Settings

Follow the instructions on the screen to perform the following:
• Set the language
• Set the country and region
• Set the time zone
• Set the date and time
• Register the Purchase Information
For details on navigating the menu, see "Navigating the Menu"
( P.5).

Setting Up the Connection

You can connect the machine to the computer using a USB
cable.
A USB cable is not included in this package. Please obtain a
suitable cable for your computer. Make sure that the USB cable you
use has the following mark.

Connecting via a USB Cable

Connect the USB cable after installing the drivers.
1
Install the drivers on your computer using the User
Software and Manuals CD-ROM/DVD-ROM.
See "For details on the installation procedures:" (P.6).
2
Connect the USB cable.
Proceed to "Setting a Paper Size and Type" (P.6).
En
5