Assembly / Nozzles; Nozzles - Fakir Prestige C 240 Mode D'emploi

Nozzles

Assembly / Nozzles

Suction hose / telescopic pipe
Insert the handle of the suction hose into the telescopic pipe
and twist slightly.
Nozzles / hand pipe and/or telescopic pipe
Stecken Sie die gewünschte Düse mit einer Drehung auf den
Handgriff des Saugschlauchs bzw. das Teleskoprohr.
Setting the length of the suction pipe
Use your thumb to press the slide element in the direction of
the arrow. Hold the lower part of the pipe in your other hand
and pull or push the suction pipe to the required length.
The vacuum cleaner is now ready for use.
CAUTION!
Always switch off the appliance before changing the nozzle.
The floor nozzle has a switch (see arrow) which sets the
nozzle for cleaning of either carpets or hard flooring. You can
activate this switch with your foot.
Vacuum-cleaning hard floors: The brush element is exten-
ded. Carpeting: The brush element is retracted.
The hard floor nozzle is used for cleaning hard floors such
as tiles, parquet or PVC etc.
The crevice nozzle serves to clean hard-to-access places,
such as deep cracks, corners, recesses etc.
The upholstery nozzle is used to clean furniture, pictures,
window sills, booksn etc.
The turbo brush can clean deep down into carpets and rugs
to remove stubborn fluff and animal hairs thanks to the
suctioning air flow driven by the rotating brush element.
NOTE!
Select a medium to high suction level.
I
WARNING!
Risk of injury: Do not place your hand into the rotating
brush roller when working with the turbo-suction brush.
GB
31