Camera Controls - dji ZENMUSE H20T Mode D'emploi

Installation
1. Remove the gimbal cap and lens protector.
2. Rotate the gimbal connector of the Matrice 300 RTK aircraft to the unlocked position and insert the
gimbal, and then rotate the gimbal connector to the locked position.
1 1
1 2
Hold the gimbal connector firmly and apply a steady, firm rotating force when attaching or detaching the
gimbal.
Ensure the microSD card slot cover is firmly in place to prevent dust or moisture entering during usage or
transportation.

Camera Controls

Remote Controller
Adjust the gimbal's tilt using the left dial and adjust its pan by the right dial. Press the shutter button or
record button to take photos or record video. Toggle the 5D button to adjust the zoom (up and down)
and EV value (left and right). The customizable button C1 can be used to recenter the gimbal, and the
customizable button C2 can be used to switch between the main and auxiliary screen.
1
2
4
1 3
4
3
1. Left Dial
2. Record Button
3. Shutter Button
4. Right Dial