Engine Oil - Honda GX200 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
3RZ1C8000.fm Page 7 Friday, April 13, 2018 9:19 AM

ENGINE OIL

Oil is a major factor affecting performance and service life.
Use 4-stroke automotive detergent oil that is designed for engines
operating on LPG.
Recommended Oil
Use 4-stroke motor oil that
meets or exceeds the
requirements for API service
category SE or later (or
equivalent). Always check the
API service label on the oil
container to be sure it
includes the letters SE or later
(or equivalent).
SAE 10W-30 is recommended for general use. Other viscosities
shown in the chart may be used when the average temperature in
your area is within the indicated range.
Oil Level Check
Check the engine oil level with the engine stopped and in a level
position.
1. Remove the oil filler cap/dipstick and wipe it clean.
2. Insert the oil filler cap/dipstick into the oil filler neck as shown,
but do not screw it in, then remove it to check the oil level.
3. If the oil level is near or below the lower limit mark on the
dipstick, fill with the recommended oil to the upper limit mark
(bottom edge of the oil fill hole). Do not overfill.
4. Reinstall the oil filler cap/dipstick.
OIL FILLER CAP/DIPSTICK
OIL FILL HOLE
(bottom edge)
Running the engine with a low oil level can cause engine damage.
This type of damage is not covered under the Warranty.
The Oil Alert system (applicable types) will automatically stop the
engine before the oil level falls below the safe limit. However, to
avoid the inconvenience of an unexpected shutdown, always check
the engine oil level before startup.
Oil Change
Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
1. Place a suitable container below the engine to catch the used oil,
2. Allow the used oil to drain completely, then reinstall the oil drain
AMBIENT TEMPERATURE
3. With the engine in a level position, fill with the recommended oil
4. Reinstall the oil filler cap/dipstick and tighten securely.
UPPER LIMIT
LOWER LIMIT
ENGLISH
then remove the oil filler cap/dipstick, oil drain bolt and washer.
bolt and a new washer, and tighten the oil drain bolt securely.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground,
or pour it down a drain.
to the upper limit mark (bottom edge of the oil fill hole) on the
dipstick.
Engine oil capacity: GX200 : 0.60 L (0.53 lmp qt)
GX390 : 1.1 L (1.0 lmp qt)
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the
Distributor's Limited Warranty.
The Oil Alert system (applicable types) will automatically stop
the engine before the oil level falls below the safe limit.
However, to avoid the inconvenience of an unexpected
shutdown, fill to the upper limit, and check the oil level
regularly.
OIL FILLER CAP/
DIPSTICK
WASHER
OIL DRAIN BOLT
OIL LEVEL
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take it in a sealed
container to your local service station for reclamation. Do not
throw it in the trash, pour it on the ground, or pour it down a
drain.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gx390

Table des Matières