Smart Control Panel - Chamberlain B353 Guide De L'utilisateur

Operation
®

Smart Control Panel

Navigation Buttons
Push Bar
Screen
Motion Sensor
LIGHT Button
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control to the garage
door opener, press the push bar until the garage door opener activates (it may take up to 3
presses). Test the door control by pressing the push bar; each press of the push bar will
activate the garage door opener.
SCREEN: The screen displays the time, temperature, and current battery charge (if
applicable) until the menu button is pressed, and then it will display the menu options. If
there is a problem with the garage doors opener the screen will display an error code, see
page 22.
PUSH BAR: Press the push bar to open or close the door.
LOCK: Prevents remote controls from working, while still allowing activation from the door
control and keyless entry. (Factory setting is OFF.)
To turn the LOCK feature ON or OFF:
1. Select LOCK from the menu. When the LOCK feature is on, a message
displays on the screen.
LIGHT BUTTON: Turns the garage door opener lights on or off when pressed. Lights stay
on for 4-1/2 minutes (factory setting), and can be changed by accessing the menu with the
navigation buttons. The LIGHT button will not control the lights when the door is in motion.
LIGHT SETTINGS:
To change the amount of time the lights stay on:
1. Select LIGHT SETTINGS from the menu.
2. Select LIGHT TIME.
3. Select the time interval.
To turn the entry light feature ON or Off (Factory default is On):
1. Select LIGHT SETTINGS from the menu.
2. Select AUTOMATIC LIGHTS.
3. Select ENTRY SENSOR.
MOTION SENSOR: Turns the garage door opener lights on when motion is detected.
Lights stay on for 4-1/2 minutes (factory setting), then turn off.
To turn the motion sensor ON or OFF:
1. Select LIGHT SETTINGS from the menu.
2. Select AUTOMATIC LIGHTS.
3. Select MOTION SENSOR.
TIMER-TO-CLOSE (TTC): DO NOT enable TTC if operating a one-piece door. TTC is to
be used ONLY with sectional doors. The TTC can be set to close your garage door after a
specified period of time (1, 5, or 10 minute intervals). As the time to close the garage door
opener occurs, the opener beeps and the lights flash before closing the door. If an object
blocks the door while closing, the garage door opener will try to close the door again. If the
object is not removed after the second try, the garage door opener reverses open, stop
and WILL NOT close until the object is removed from the door's path. TTC WILL NOT
work if the garage door opener is operating by battery power or if the safety reversing
sensors are misaligned. Adding a keyless entry to control the opener is recommended to
avoid an accidental lock out when using this feature.
16
To turn TTC on or off or to set the TTC time interval:
1. Select TTC from the menu.
2. Select a time interval of 1, 5, 10 minutes or a custom setting up to 99 minutes.
Once the TTC has been set and the door is open, a message will display on
the screen with the selected time interval.
To temporarily suspend the TTC feature select HOLD. Select REL to resume normal TTC
operation.
Other Menu Options
CLOCK SETUP: Set the time; choose 12 or 24 hour clock and show/hide clock.
TEMPERATURE: Display the temperature in Fahrenheit or Celsius and show/hide the
temperature.
LANGUAGE: Select English, Spanish or French.
CONTRAST ADJUST: Adjust the screen contrast.
PROGRAM: Any compatible remote control, wireless keyless entry, or myQ
be programmed to the garage door using the PROGRAM option from the menu.
®
devices can