Hold - Olympus WS-320M Mode D'emploi

Hold

................................................................................................................................................................
Notes
• If you switch to the Hold mode during stop status, the display will be turned off. Pressing any button during
this status will make the clock display flash for 2 seconds, but will not operate the recorder.
• If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state
unchanged. (When playback has ended and the recording has ended due the remaining memory being
used up, it will be in the stop state.)
Setting the HOLD switch to the HOLD position.
If you set the recorder to HOLD status by sliding the HOLD
switch in the direction of the arrow, the current conditions will
be preserved, and all buttons and switches except the HOLD
switch will be disabled. This feature is useful when the recorder
has to be carried in a bag or pocket.
Remember to reset the HOLD switch when using the
recorder.
5
73