Power Supply; Turning Off The Power - Olympus WS-320M Mode D'emploi

Power Supply

When the recorder is not used, setting it to HOLD turns off the recorder, suppressing the
consumption of the battery to a minimum.
Even if the power is turned off, the existing data, settings of each mode, and clock setting will be
maintained. To turn the power on, cancel the HOLD switch.
If the recorder is stopped/not used for over 5 minutes after it is turned on, it goes into standby
(power-save) mode, and the display shuts off. To exit standby mode and turn on the display,
press any button.

Turning Off the Power

Move the HOLD switch to the
HOLD position while the recorder
is not in operation.
After "Hold" is displayed, flashing for
2 seconds, the display will turn off.
Turning On the Power
Release the HOLD switch of the
recorder.
Standby Mode and Display Shut Off
1
11