Atag ES9011EVM Instructions De Montage page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
2. Gently pull the grease collector + fan straight downwards.
Attention!
Keep the grease collector in the position as shown in the picture.
3. Now you can clean it in the dishwasher or by hand.
You don't have to disassemble the grease collector, the fan and the service tool. You can
put it in the dishwasher, with the grease collector pointing down, as one unit.
It is possible to remove the service tool (only for cleaning), if it doesn't fit in your
dishwasher.
If you clean it by hand, you can disassemble the service tool and then you can also
disassemble the fan and the grease collector.
Please note; after cleaning, the fan, the grease collector and the service tool have to be
assembled again.
Clean the inside of the hood with soapy water and a soft cloth.
Attention!
Never replace the grease collector and
the fan as separate parts; always use
the service tool to place it back into
the hood!
EN 10

Publicité

Table des Matières
loading

Table des Matières