General Setting; Display Language Selection; Display Tune (Display Contrast); To Change The Battery Setting - Tornado BD 28/20 Mode D'emploi

GENERAL SETTING

To enter the menu for the setting, use the keyboard of the
instrument board and proceed as follows:
1. Keep the buttons (1) and (5) pressed simultaneously.
2. Turn the key to switch on the machine.
3. When "ID CHECK" is shown on the display, press the
enter button (2).
Once entered in GENERAL SETTING it will be possible
to change the following default settings by simply scrolling
through the menu using buttons (1) and (4).

DISPLAY LANGUAGE SELECTION

English is the default language; it is possible to change it into
Italian.
To select the language just visualize first "Language", then
select it scrolling with the buttons (3) and (5).
Once the language is chosen, confirm using button (2).

TO CHANGE THE BATTERY SETTING

Once entered "General Setting", it is possible to set the
machine depending on the batteries installed (AGM / GEL /
LEAD-ACID).
To select the proper setting, just visualize first "BATTERY",
then select it by scrolling with the buttons (3) and (5).
Once the setting is chosen, confirm using button (2).
An incorrect setting may damage irreparably the battery.
ALWAYS verify to have set the correct parameter.
The defined battery setting is visible when the machine is
turned on (see "BATTERY SETTING or DISPLAY READ-
ING").

DISPLAY TUNE (DISPLAY CONTRAST)

Once entered in General Setting, it is possible to improve the
display contrast using the button (3) to increase it and the
button (5) to decrease it.
Once selected the contrast, confirm using button (2).

DISPLAY BRIGHTNESS

Once entered in General Setting, it is possible to increase or
decrease the display brightness using buttons (3) and (5).
Once selected the brightness, confirm using button (2).
7