Recommended Brushes; Technical Description - Tornado BD 28/20 Mode D'emploi

Cleaning Width
Squeegee Width
Working Capacity
Brush Diameter
Brush Speed
Brush Pressure
Brush Motors (2)
Traction Motor
Vacuum Motor
Vacuum
Drive Type
Speed
Maximum gradient
Solution Tank
Recovery Tank
Machine Length
Machine Height
Machine Width (w/o Squeegee)
Weight of the machine (Empty
w/o batteries)
Battery Compartment
Sound Level
Voltage

RECOMMENDED BRUSHES

PART NO. QTY DESCRIPTION
48914030 2 Brush, PPL 0.6 14"
48914040 2 Brush, PPL, 0.9, 14"
48914050 2 Brush, TYNEX, 14"
48914060 2 Brush, 5-mix, 14"
48803030 2 Pad holder w/center lock, 13" For 14" pads
MATERIAL CHARACTERISTICS
PPL Good wear resistance. Maintains characteristics with hot water up to 122
It is not hygroscopic
NYLON Excellent wear resistance, even with hot water. It is hygroscopic
TYNEX Nylon bristles with grains of abrasive material. Use with caution in order not to
mark the floor or ruin the polishing
BRISTLES Thicker bristles are more rigid and must be used on smooth floor or floor with small
THICKNESS joints. On irregular floors with deep joints or relieves, it is recommended to use
softer bristles which penetrate more easily and deeper.
PAD HOLDER The pad is recommended to clean smooth floors.
BD 28/20 TECHNICAL DESCRIPTION
in/mm
in/mm
m /h/ft
2
in/mm
rpm
lbs./kg
W/A
W/A
W/A
in water lift/mbar
mph/km/h
%
gal/l
gal/l
in/mm
in/mm
in/mm
lbs./kg
in/mm
dB (A)
V
USE
Normal floors
Smooth floors with small joints an persistent dirt
Floors of resistant material and very dirty
All types of floor
4
28/685
34/860
/h 29494/2740
2
14/355
160
110/50
2 x 350/2 x 14.5
300/12
570/23
64/160
Automatic
2.5/4
10
20/75
22.5/85
59/1490
41/104
30/760
320/145
15 x 20 x 11/385 x 500 x 290
<70
24
F (50 C).
0 0