Bresser Junior 8851300000000 Mode D'emploi page 17

Smartphone holder
Open the flexible holder and put your smartphone in it. Close the cra-
dle and make sure your phone is properly seated. The camera must
be positioned exactly above the eyepiece. Open the locking clip on
the back of the holder and fit the eyepiece view exactly onto your
smartphone camera. Now retighten the locking clip and attach the
smartphone holder to the eyepiece of your microscope. Now start the
camera app. If the image is not yet centered on your display, loosen
the locking clip slightly and readjust. It may be necessary to use the
zoom function to fill the image on the display. A slight shading at the
edges is possible. Remove the smartphone from the cradle after use!
NOTE:
Make sure that the smartphone cannot slip off the cradle. Bresser GmbH
accepts no liability for damage caused by a dropped smartphone!
Warranty & Service
The regular guarantee period is 5 years and begins on the day of purchase.
You can consult the full guarantee terms and details of our services at
www.bresser.de/warranty_terms.
FR
17