S&P CHEMINAIR Mode D'emploi page 20

ACCESSORIES
 Position the appliance as close as possible
(1.5 to 2 m maximum) to the aperture
opened for the intake duct
 The unit should ideally be located in a
position which keeps the distribution system
as streamlined as possible (e.g. number of
elbows and bends kept to a minimum).
 Install on an even surface. If not even
surface is available, prepare the surface
before installation.
 Install the appliance on a glass wool
bedding to absorb vibration, with a sheet of
fire-resistant material in between (e.g.
gypsum board of approx. dimensions 50 x
50 cm).
NEVER COVER THE APPLIANCE
20
2 m 2 m