Installation - Signature SHD6X Instructions D'utilisation

3. INSTALLATION

1. The cooker hood should be placed at a
distance of 65-75cm (26-30inch) from the
cooking surface for the best effect. See Pic. 1.
2. Install the hook on a suitable place once the
installation height is fixed, and keep it in line. The
fixed position of the inside chimney bracket is
the place of chimney.
3. Fix the extensible tube on the hood, and put the
cooker hood on the hook. See Pic. 3.
4. Put the glass according to the lead direction and way on the cooker
hood, and then use the screws to fix the glass, also lead the extensible
pipe outside of the room, meanwhile adjust the height of the inside
chimney to the position of the inside chimney bracket and fix on it by
screw, here should be sure the inside chimney can be flexed freely.
See Pic. 4.
5. Install the chimney, and adjust the height of the inside chimney to the
position of the inside chimney bracket, then fix on it by screw. After
adjusting the position, fix the body with safety screw. See Pic. 5.
Note: The two safety vents are positioned on the back casing,
with diameter of 6mm.
Inside page
- -