How To Use Your Cooker Hood - Signature SHD6X Instructions D'utilisation

Note :
● Any installation work must be carried out by a qualified electrician or
competent person.
● Do not connect the ducting system of the hood to any existing
ventilation system which is being used for any other appliance, such
as warmer tube, gas tube, and hot wind tube.
● The angle of the bend of the ventilation pipe should not be less than
120º; you must direct the pipe horizontally, or, alternatively, the pipe
should go up from the initial point and should be led to an outer wall.
● After the installation, make sure that the cooker hood is level to avoid
grease collection at on end. See Pic. 6

4. HOW TO USE YOUR COOKER HOOD

1. Push stop button, and the motor will stop.
2. Push the Low button, and the motor runs at low speed.
3. Push the high button, and the motor runs at mid speed.
4. Push the High button, and the motor runs at high speed.
5. Push the light button and the two lights will come on. Push it again
and the light will turn off.
Shop Low Mid
Pic. 7
- 13 -
Inside page
High Light