Feature; Installation - Signature SHD90FLIGNE Instructions D'utilisation

the appliance is to be fixed to its support, thanks to refer to
the section "INSTALLATION AND FIXING".

FEATURE

The cooker hood is made of high quality materials in a streamlined design.
●
Equipped with high power and low noise electric motor, the cooker hood
●
produces strong suction, low noise.
With the isolated low voltage circuit board control, 12V dc input, the lights
●
are therefore safer.
Special wind tunnel construction, free dirt will be absorbed in s second.
●

INSTALLATION

The cooker hood should be placed at a distance of 65-75cm from the
●
cooking surface for safety and best effect. See Fig.1
There shall be enough room for the installation
●
Install the hook on a suitable place once the installation height is fixed, and
●
keep it in line. The fixed position of the hood bracket is the place of the
chimney. See Fig. 2.
Put the cooker hood on the hook, then fix the hood on the hook by screws,
●
See Fig.3 and 4.
Fix the extensible tube on the hood, see Fig.5.
●
Install the inside and outside chimney, and fix outside chimney on the wall,
●
see Fig.6.
Adjust the height of inside chimney to the position of chimney hook, then fix
●
on it by screw. See Fig.7.
-17-