Keys; Telephone Configuration - Swissvoice CP-20 Mode D'emploi

CP-20

Keys

Ring Volume Switch
Flash button

Telephone configuration

Note : Immediately change the following factory settings.
Ringer volume level
The phone will ring when there is an incoming call. You can set the ringer volume to high,
middle or low level. The ringer volume switch is indicated in the following illustration under A.
Pulse tone setting
You can select P (PULSE) or T(TONE) dialing mode according to the requirements from the
local telephone operator. The T/P switch is indicated in the following illustration under B.
8
Tone/Pulse
Flash Time Switch
Switch
In use indicator
Message indicator
Redial button
CP-20