BH FITNESS S2TiB Manuel Du Propriétaire page 29

DOWNLOADING APPS AND
PAIRING YOUR DEVICE WITH YOUR EQUIPMENT
DOWNLOADING THE SOFTWARE
Connect the Apple device with the App Store (iTunes) or your Android Device with Google
Play, search for "Pafers", then read the APP introductions and Download the APPs with
bicycle/elliptical machine functions to your device. Note: if you download an APP for a
treadmill and pair it with an Elliptical it will not work.
• The App uses bluetooth mode, so please make sure the machine and device you are using
has the optional DUALKIT installed. See BH DualKit installation on this page.
• The App contains the following functions, the user must open a 3G network or wi-fi
network:
(a) Managing Data - After completing the registration in the "Pafers" App, log on to your
personal account. Now that you have registered you can record all of your workout data and
save it to your device.
(b) Some APPs need connection to Google maps in order to function correctly.
BH DUALKIT INSTALLATION
1. To Access iConcept compatible apps, an optional (purchased separately) BH DualKit
Module is required.
INSTALLATION:
1.) There should be a blue square on the front of the console that says "DualKit". This is
where the DualKit Module plugs in.
2.) Select the appropriate BH DualKit Module. On the front of the module, it will say the
machine type and on the back of the module it will say if it is a SMART or CLASSIC type.
There are 3 types of modules:
a.) Bike & Elliptical - Classic
b.) Treadmill - Classic
c.) BH DualKit - Works for all machine types
3.) Make sure the USB part is extended from the module.
- Push up on the sides of the DualKit Module (Fig. 1)
- The USB Port should extend out of the bottom of the module (Fig. 2)
4.) Push the module in the USB slot on the front of the console (Fig. 3)
29