BH FITNESS S2TiB Manuel Du Propriétaire page 19

HOW TO CHECK IF LUBRICATION IS NEEDED:
Hold up the running belt and put your hand as close as possible to the central part of
the back side of the running belt. If you feel moisture and your hand comes away with
silicone residue, then lubrication is not necessary. If there is no moisture, then the belt
needs lubrication.
STEPS TO LUBRICATE THE RUNNING BELT:
a.) Make sure that the treadmill is fully stopped and off.
b.) Fold the treadmill.
c.) On the underside of the treadmill, lift up the running belt and put the silicon oil
bottle as close to the center of the running belt as possible. Spray the silicone oil on the
innder side if the running belt. Lubricate on both sides of the running belt.
d.) Fold down the treadmill. Turn on the treadmill and set the speed at 1mph to evenly
spread the silicone. Step on the treadmill and walk from side to side for 2 minutes to
evenly distribute the lubricant.
19