Getting Started - Phonak Click'nTalk Mode D'emploi

Getting started

Attach Click'nTalk gently to the audio plug
position and appearance may vary depending on the
mobile phone model.
After a few seconds a headset icon
on the mobile phone screen. Make sure you select
the "wired headset" from the mobile phone's
menu if necessary.
For transportation, unplug Click'nTalk.
!
Hold Click'nTalk with two fingers and gently pull
the device from the audio plug
Before making a call, always ensure Click'nTalk
is firmly attached.
. The plug
appears
.
GB
5