Wi-Fi Module; Storage; Cleaning And Maintenance; Safety Information - CASO DESIGN 1327 Mode D'emploi Original

18.2 Wi-Fi Module

Press the W-Lan button
device beeps once and the W-LAN button
aleady connected to your W-LAN (pairing process), the button flashes for approx. 3-5
seconds and lights up constantly after a successful connection. If the button continues to
flash, no connection to the configured W-LAN could be achieved.(reception level is too low
or W-LAN name or access have been changed or W-LAN password is wrong). If the
pairing process has not yet been carried out, please follow steps mentioned in pairing
instructions.

19 Storage

Store the unit in its upright position, out of the reach of children.
► Turn off the device after use. So you can avoid unnecessary energy consumption
and ensure your safety.
► Always unplug the appliance from its outlet immediately after using and before
cleaning.

20 Cleaning and Maintenance

This chapter provides important information on properly cleaning and maintaining your
SV 1200 Pro Smart .

20.1 Safety information

Danger
Please observe the following safety notices, before cleaning the unit to avoid damage to
the unit or personal injury:
► To ensure optimum performance, the unit must be cleaned regularly. Failure to clean
the unit regularly can lead to potential malfunctions, as well as safety and health
risks.
► Turn off and unplug the unit prior to cleaning.
► Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned
for long periods can make it very difficult to remove leftover food and grime and may
even damage the unit.
► If moisture penetrates the unit's housing, it can damage the electronic components.
Please ensure that no moisture enters the device (control element).
briefly to activate the integrated W-LAN module.The
PLEASE NOTE
starts to flash slowly. If the device is
40