Product Introduction; Factory Reset - Sonoff BASICZBR3 Mode D'emploi

SONOFF TECHNOLOGIES CO., LTD.

Product Introduction

Wire Fastener Cover
Pairing button
Manual switch
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
Features
SONOFF ZigBee smart devices based on ZigBee wireless communication protocol
allow you to remotely turn on/off, schedule on/off connected devices, and set smart
scenes, etc.
Single/Countdown
Remote Control
Above functions are determined by ZigBee Hub.
Switch Network
If you need to change the network, long press the pairing button for 5s until the
ZigBee LED signal indicator flashes and release.then the device enters quick pairing
mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to factory setting.
Voice Control
Timing
ZigBee LED indicator(Green)
On/off LED indicator(Red)
Smart Scene
10
English
Share Control