Controller Operation - mspa MONO C-MO04 Manuel D'utilisation

CONTROLLER OPERATION

Heater Button
Bubble Button
Up Button
Temperature display: press RESET on PRCD, the screen shows current temperature
Heater Button:
Meanwhile, the filter will automatically run and test for 15s. The HEATER button is green within
HEATER
15s. If there is no abnormality, the heating starts until the temperature reaches setting value. After
the current water temperature drops below the setting temperature, the heating system will restart
automatically. When the HEATER button is red, the heating system is activated. When the
HEATER button is green, the heating system is at rest as the water is at the set temperature.
Filter Button:
green when activated.
FILTER
NOTE: Filtration cannot be turned off when Heating is activated. When the Heating function is
turned off, Filtration will be stopped after 30 seconds.
NOTE: Auto-filtration system every 4 hours.
Bubble Button:
10-mintues feature. The light of Bubble button displays green when activated.
BUBBLE
HEATER
BUBBLE
UP
Press HEATER button to turn the function on/off.
Press FILTER button to turn the function on/off. The light of FILTER button display
To activate the bubbling massage function, which has a 20-minutes auto off for
°C
FILTER
TIMER
DOWN
14
Filter Button
Timer Button
Down Button