Attaching The Headpiece Cable To The Sound Processor - Advanced Bionics Naída CI M30 Mode D'emploi

The pin does not need to be removed from the sound pro-
cessor. As long as the tool is pushed in flush on one side of
the sound processor, the pin should be displaced enough
to adequately remove the earhook. Remove the tool from
the sound processor. Gently grasp the earhook at the top
near where it connects with the sound processor and pull
forward until it is separated from the sound processor.

Attaching the headpiece cable to the sound processor

To attach the headpiece cable to the sound processor,
hold the headpiece cable by the cable's strain relief.
23