Attaching The Headpiece Cable To The Sound Processor - Advanced Bionics Sky CI M90 Mode D'emploi

enough to adequately remove the earhook. Remove the tool
from the sound processor. Gently grasp the earhook at the
top near where it connects with the sound processor and
pull forward until it is separated from the sound processor.
Attaching the headpiece cable to the sound
processor
To attach the headpiece cable to the sound processor,
hold the headpiece cable by the cable's strain relief. Align
the connector on the cable with the connector on the
sound processor and gently push the cable into the sound
processor until it snaps into place.
24