Managing Bluetooth Phone Calls With The Naída Ci M30; Streaming Audio Via Bluetooth With The Naída Ci M30 - Advanced Bionics Naída CI M30 Mode D'emploi

Managing Bluetooth Phone Calls with the Naída CI M30
When the sound processor is directly connected with
a Bluetooth-enabled phone, you will be able to hear the
caller's voice directly through the sound processor. The
sound processor picks up your voice through the sound
processor microphones.
When making a phone call, you will hear a dialing tone
through the sound processor. The sound processor
microphones pick up your voice. When receiving a call, a
call notification will be heard through the sound processor.
You can accept the call with a short press on the upper
or lower part of the multifunction button on the sound
processor or directly on the phone.
You can reject or end a call with a long press on the upper
or lower part of the multifunction button on the sound
processor or directly through the phone.
Streaming Audio via Bluetooth with the Naída CI M30
After successful pairing of your processor(s) to your
Bluetooth-enabled device, ensure that your device
is not muted and volume is not set to minimum. Then,
simply start the audio on the Bluetooth-enabled device
and the sound processor will start streaming the audio.
Environmental balance and access to surrounding sounds
can be managed using the multifunction button, the AB
Remote mobile application, or the Phonak RemoteControl.
31