Adjusting The Voice Sync Level For Recording - Olympus LINEAR PCM RECORDER LS-10S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

[HIGH]:
This is a highly sensitive mode which can
record surrounding noises.
[LOW]:
This is the standard level of microphone
sensitivity. Select this mode for cases
where the volume of the source sound is
high, such as a band performance.
Note
2
• When you would like to clearly record a
speaker's voice, set the recorder to [LOW] and
hold its built-in stereo microphone close to the
speaker's mouth (5-10 cm) before recording.
28
Adjusting the voice sync level for
recording
Voice sync recording allows you to start
recording when voice louder than the
voice sync level (detection level) is de-
tected, and automatically stop recording
when the voice becomes quiet. When
voice sync recording is on (
voice is below the voice sync level (detec-
tion level) for longer than the specified
detection time, the recorder stops.
REC s button
STOP 4 button
9 0 button
1
Select the recording folder (☞ P.19 to
P.21).
How to change folders:
1 Pressing the LIST button at the file display
while stopped will return you back one layer
above.
Pressing the LIST button repeatedly will
bring you to the folder list display.
2 Pressing button 2 or 3 at the folder list
display will select the folders for voice
recordings.
Newly recorded audio will be saved as the
last file in the selected folder.
Recording
P.44) and the

Publicité

Table des Matières
loading

Table des Matières