Olympus LINEAR PCM RECORDER LS-10S Mode D'emploi page 26

Recommended settings by recording condition
The recorder is set up so that it can perform high quality recording equivalent to that of a music CD right away.
The various functions relating to recording can be configured in detail to suit the recording conditions.
Recording
settings Indoor musical
performance
2
When the [Rec Level] is set to [Manual] you can adjust the recording level.
Recording level*
(☞ P.23) Adjust while looking at the level meter
Microphone
sensitivity
(☞ P.27)
Low Cut Filter
(☞ P.27)
[Rec Mode]
The recording level can be adjusted to suit the volume of the original sound
(☞ P.41, P.43)
You can configure whether to adjust the recording level automatically or to adjust it manually.
[Rec Level]
(☞ P.41, P.43)
When [Rec Level] is set to [Manual] you can configure the limiter function
[Rec Monitor]
Select whether or not to output the recording monitor sound from the EAR jack
(☞ P.41, P.44)
[Plug-inPower] Select whether or not to use the plug-in power function according to the external microphone
(☞ P.41, P.44) connected to the MIC jack
* When [Rec Level] is set to [Auto] the recording level will be adjusted automatically. When this happens,
the recording level adjustment function and limiter function will not work (☞ P.23, P.41, P.43).
26
Recording condition
Band
Performance
performance
in a vast hall,
in a practice
etc.
studio
[LOW]
[OFF]
Recording
Outdoor
environment Conferences
sounds like with large
wild birds crowds in
singing, vast meeting
railroad venues
noises, etc.
[HIGH]
[ON]
Conferences
with a few
people
indoors