Choosing Stereo Or Mono Reception For Fm Radio; Radio Station Presets; About Presets; Storing A Radio Station As A Preset - PURE Evoke H3 Manuel D'utilisation

Choosing stereo or mono reception for FM radio

By default, your Evoke H3 uses stereo reception for FM radio. If your FM radio stations have a weak signal,
try using mono reception to improve the signal strength.
To choose stereo or mono reception:
1. Press .
2. Press the Select buttons to choose 'Stereo'.
3. Press the Select buttons to choose 'FM Stereo' or 'Forced Mono'.

Radio station presets

About presets

You can store your favourite radio stations as presets. You can use presets to quickly tune to your stored
radio stations whenever you want.
On the top of your Evoke H3, there are four preset buttons. Use
favourite radio stations. Use
You can store up to 20 digital radio stations and up to 20 FM radio stations as presets.

Storing a radio station as a preset

To store a radio station to a preset from 1 to 3:
1. Tune to the radio station you want to store.
2. Choose a preset button from
Tip: If there is already a radio station stored to the preset you've selected, the new station replaces it.
To store a radio station to the preset list:
1. Tune to the radio station you want to store.
2. Press and hold
3. Press the Select buttons to choose a preset number. A
Tip: If there is already a radio station stored to the preset you've selected, the new station replaces it.
10
to open a list of all your presets.
to
until the preset list is displayed.
then press and hold it until a
is displayed.
to for quick access to your
is displayed.