Automatically Tuning To Digital Radio Stations; Fm Radio; Listening To Fm Radio; Changing The Fm Radio Station - PURE Evoke H3 Manuel D'utilisation

Automatically tuning to digital radio stations

When you switch your Evoke H3 on for the first time, it automatically scans for digital radio stations. If you
move your Evoke H3 to a new location, perform an autotune to update the list of radio stations.
To automatically tune to digital radio stations:
1. Press .
2. Press the Select buttons to choose 'Autotune'.
Your Evoke H3 starts scanning for digital radio stations.

FM radio

Listening to FM radio

To listen to FM radio:
• Press until 'FM' is displayed.

Changing the FM radio station

To change the FM radio station:
• To scan to the previous or next radio station, press and hold
• To manually tune to a radio station, press
The frequency steps up or down by 0.05 MHz.

Changing the scan settings for FM radio

When you scan for FM radio stations, you can include all radio stations or only those with a strong signal.
To change scan settings for FM radio:
1. Press .
2. Press the Select buttons to choose 'Scan Setting'.
Press the Select buttons to choose 'Strong Stations Only' or 'All Stations'.
3.
or
or .
.
EN
9