Adjusting The Rinse Aid Reservoir - Saba LVS14C44M21W Instructions D'utilisation

1. To open the dispenser, turn the cap to the "open" (left) arrow
and lift it out.
2. Pour the rinse aid into the dispenser, being careful not to
overfill.
3. Replace the cap by inserting it aligned with "open" arrow and
turning it to the closed (right) arrow.
NOTE:
Clean up any rinse aid spilled while during filling with an
absorbent cloth to avoid excessive foaming during the next wash.
Don't forget to replace the cap before you close dishwasher door.

Adjusting the rinse aid reservoir

Turn the rinse aid indicator dial to a number. The
higher the number, the rinse aid the dishwasher
uses. If the dishes are not drying properly or are
spotted, adjust the dial to the next higher number
until your dishes are spot-free. Reduce it if there
are sticky whitish stains on your dishes or a bluish
film on glassware or knife blades.
GB
86