Saba LVS14C44M21W Instructions D'utilisation page 101

Change the Program...
Premise:
1. A cycle that is underway can only be modified if it has only
been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may
have already drained the wash water. If this is the case, the
detergent dispenser must be refilled (see the section entitled
«Loading the Detergent»).
2. Press the Start/Pause button, the machine will be in standby
state, press the program button more than 3s then you can
GB
change the program to the desired cycle setting (see the
section entitled «Starting a wash cycle...»).
NOTE:
If you open the door during a wash cycle, the machine will pause.
The program light will stop blinking and the buzzer will mooing
every minute unless you close the door. After you close the door,
the machine will keep on working.
IF Your model has broken remember function, the machine will
go on to finish the selected program after the power cut.
99