Saba LVS14C44M21W Instructions D'utilisation page 83

1. Switch on the appliance;
2. Press the Program button for more than 5 seconds to start
the water softener set model within 60seconds after the
appliance was switched on (The Salt and Rinse aid warning
lights will be on periodically when it gets in the set model);
3. Press the Program button to select the proper set according to
your local environment, the sets will change in the following
sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the setup model.
GB
WATER HARDNESS
°dH
0~5
6-11
12-17 21-30 15-21 2.1-3.0
18-22 31-40 22-28 3.1-4.0
23-34 41-60 29-42 4.1-6.0
35-55 61-98 43-69 6.1-9.8
Note: 1
1°dH=1.25°Clarke=1.78°fH=0.178mmol/l
°dH: German degree
°fH: French degree
°Clark: British degree
Note: 2
Contact your local water board for information on the hardness of
your water supply.
81
°fH °Clarke mmol/l
0~9 0~6
10-20 7-14
Selector
Position
0~0.94 H1
1.0-2.0 H2
H3
H4
H5
H6
Salt
consumption
(gram/cycle)
0
9
12
20
30
60